Tag Archives for " denver hardwood "

Is Your Hardwood Flooring Showing Signs Of Any Of These Five Issues?

When you initially installed wood flooring throughout your household, you’d anticipated it could remain stunning for many years. You wanted the hardwood’s splendor to provide the areas a pleasing appeal and wow your friends and family

Even though they are reasonable anticipations, things from time to time turn out differently. Your floors will often have developed issues, several of which may look significant.

Beneath, we’ll identify five problems that may arise with your Denver hardwood flooring

As you go along, we shall identify the variables that make contributions to them, and offer you suggestions for getting them fixed

The list below is by no means complete. Nevertheless it offers a peek at the imperfections you may perhaps some day observe (or hear) in your flooring.

#1 – Buckling Planks

When boards buckle, their centers exceed their edges. They seem to contour to the outside, as if ballooning away from the subfloor. Usually this is attributable to exposure to considerable dampness, including flooding. It can also come about when the planks are nailed improperly to the subflooring.

It usually is possible to remove the damaged boards, and permit them to dry out. Once dry – and after the source of the humidity is eliminated – they can be changed out with nothing but minor touch-ups. More commonly, the defective boards have to be swapped out with new ones. A lot of people wait too long to have buckling floors fixed, making it possible for the damage to become worse.

#2- Cupped Floor Boards

Cupping happens when the planks’ centers fall below their edges (the opposite of buckling). This problem also is caused by humidity. Many cases of cupping come from moisture in the air (i.e. high humidness)

Certain instances are due to dampness under the flooring, as can happen when kitchen appliances leak or a residence has bad drainage.

Just like buckling, the source of the humidity has to be eradicated to allow the planks the opportunity to dry up; if high humidity is the cause, a dehumidifier might need to be put inside the room in which cupping has occurred.

#3 – Gapping Between The Planks

A modest amount of spacing between your hardwood planks is normal. As the level of dampness in the air shifts – namely from season to season – breaks are likely to appear; this crops up when dry temperature draws dampness from the boards, causing them to contract. This could also happen in the course of cold temperatures if a heating unit is utilized inside your home. Once the humidity in the air grows, the spaces have a tendency to close.

Significant spaces that appear between your planks are abnormal and generally everlasting. They could be caused by improper safe-keeping of the product prior to installment; if the boards aren’t permitted to adjust to the installation environment, the shift in wetness can lead to considerable spacing. The only method to restore the flooring is to replace the planks.

#4 – Squeaking And Additional Sounds

When hardwood flooring is noisy, it signifies there’s some form of mobility. For instance, the boards might not be secured effectively to the subfloor. This could occur due to poor nailing or inadequate glue used in the course of glue-down setups.

Now and again, the tongue and groove characteristic of the planks makes it possible for the sides to move in opposition to each other. This is usually a milling issue.

Managing squeaky flooring surfaces is moderately simple. If the planks aren’t set effectively to the subflooring, adding face nails or glue should really fix the problem. If the boards are milled poorly, they need to be swapped out.

#5 – Roughness Of The Boards

If the surface of the boards feels rough to the touch, it means they have not been correctly taken care of. To illustrate, debris might have been caught underfoot and ground into the boards; or, a pet’s nails could have resulted in small chips. At times, contact with drops of liquid can cause small pockets to generate on top.

The best way to fix this issue is to refinish the planks. Once a new finish is applied, better care ought to be taken to sustain the floor surfaces.

A majority of the issues that could impact your hardwood floors are preventable. Most problems develop because of poor installation, lack of acclimation, or poor upkeep. Keep these things in mind when setting up and fixing your hardwood flooring.